Sony MVC-FD95 - Manual (Page 19)

masterpage:Right
filename[D:\nakano's\3061389111\3061389111MVCFD95UC\02GB-
MVCFD95UC\04bas.fm]
BBBB
Rec
o
rd
ing
19
model name1[MVC-FD95]
[3-061-389-11(1)]
When you use the self-timer function, the subject is recorded 10 seconds after you
press the shutter button.
Select on the LCD screen with
v/V/b/B on the control button, then press the
center
z. The
(self-timer) indicator appears on the LCD screen or on the finder,
and the subject is recorded 10 seconds after you press the shutter button. The self-
timer lamp flashes after you press the shutter button until the image is recorded.
Press OPEN (FLASH) to pop up the flash. The initial setting is AUTO (no
indication). In this mode, the flash automatically strobes when the surroundings
become dark. When you change the flash mode, press
(Flash) repeatedly so that
the flash mode indicator appears on the LCD screen or on the finder. This setting can
be set only when the flash is popped up.
Each time you press the button, the indicator changes as follows.
(No indication)
t t t t (No indication)
Auto red-eye reduction : The flash preparatively strobes before recording to
reduce the red-eye phenomenon.
Forced flash : The flash strobes regardless of the surrounding brightness.
No flash : The flash does not strobe.
You can change the amount of the flash light with [FLASH LEVEL] in the menu
settings (page 34).
Using the self-timer
Recording images with the flash
Control button
Self-timer lamp
Shutter button
(Flash)
OPEN (FLASH)
01cov.book Page 19 Thursday, March 9, 2000 10:26 AM