Sony MVC-FD95 - Manual (Page 42)

masterpage:Left
filename[D:\nakano's\3061389111\3061389111MVCFD95UC\02GB-
MVCFD95UC\07adv.fm]
42
model name1[MVC-FD95]
[3-061-389-11(1)]
Adjusting the white
balance (WHITE
BALANCE)
Normally the white balance is
automatically adjusted.
To shoot in one-push white
balance mode
1 Press WHITE BALANCE
repeatedly until the indicator
appears.
2 Shoot a white object such as paper
full under the same situation you will
shoot.
3
Press .
The indicator flashes quickly.
When the white balance has been
adjusted and stored in the memory, the
indicator stops flashing.
To reactivate auto
adjustment
Select [AUTO] in step 2 .
Notes
• Select [AUTO] when shooting with
fluorescent lighting.
• The indicator means:
Slow flashing: white balance is not set.
Quick flashing: white balance is being
adjusted (after you pressed
).
Lit steady: white balance has been set.
• If the indicator keeps flashing even
when you press , record in automatic
white balance mode.
1 Set the PLAY/STILL/MOVIE
selector to MOVIE or STILL.
2 Press WHITE BALANCE
repeatedly to select the
desired white balance
setting.
IN DOOR ( n )
• Places where the lighting
condition changes quickly
• Under bright lighting such as
photography studios
• Under sodium or mercury lamps
OUT DOOR ( )
Recording a sunrise/sunset, night
scene, neon signs, or fireworks
One-push white balance ( )
Adjusting the white balance
depending on the light source
AUTO (No indicator)
Adjusts the white balance
automatically
2
1
01cov.book Page 42 Thursday, March 9, 2000 10:26 AM