Sony STR-DG910 - Manual (Page 62)

62 US
D:\CANNES\SONY_HA\JOB 2007\STR-DG910\IM_910_US\STR-DG910_data\GB04AMP_STR-
DG910-UC.fm masterpage: Left
STR-DG910
3-094-430-11 (1)
If you connect a sub woofer
This receiver will generate a low frequency
signal for output to the sub woofer when there
is no LFE signal, which is a low-pass sound
effect output from a sub woofer to a 2 channel
signal. However, the low frequency signal is
not generated for “NEO6 CIN” or “NEO6
MUS” when all speakers are set to “LARGE”.
Notes
• This function does not work when ANALOG
DIRECT is selected.
• DTS Neo:6 does not work for DTS 2CH audio, the
sound is played as 2 channel.
• Dolby Pro Logic IIx decoding does not function for
signals with a sampling frequency of more than 48
kHz.
• NEURAL SURROUND is activated as a PCM
signal of which the sampling frequency is less than
48 kHz or a 2 channel analog signal. The NEURAL
SURROUND processing will be turned off
automatically when another type of signal is input.
The beginning of the sound may be dropped out
when the NEURAL SURROUND processing is
turned on/off.
Tip
When a multi channel signal is input, only Dolby
Pro Logic IIx decoding is effective. When you select
decoding modes other than Dolby Pro Logic IIx,
multi channel sound (being encoded) is output.
Selecting a pre-
programmed sound field
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home.
Press MOVIE repeatedly to select a
sound field for movies or press
MUSIC repeatedly to select a sound
field for music.
For details, see “Types of sound field
available” (page 63).
2CH
A.F.D.
SAT TV TUNER
2CH A.F.D. MOVIE MUSIC
SLEEP
CATEGORY
MODE D.TUNING
SA-CD/CD
AUX DMPORT RECEIVER
2 3 1
AUTO CAL
MUSIC
MOVIE