Sony DCR-PC350 User Manual

Page 46

Advertising
background image

Recording

46

– [AE SHIFT] is anything other than 0
– [16:9 WIDE] mode
– Progressive recording mode
– Picture effect ([PICT.EFFECT])

• When you are recording with [CINEMA EFECT],

you cannot switch over to any other types of Digital
effects.

• When you set [DELAY MOTION], the effect is

canceled during the zoom operation.

z

Tip

• When the picture is played back on your TV with

[CINEMA EFECT], the images will appear the same
as images recorded with the [16:9 WIDE] format in
the [ON] mode (p. 69).

• When using [DELAY MOTION], using a tripod to

steady the camcorder is recommended.

• You can create a picture with color and brightness

reversed or a picture that looks like a pastel drawing
while recording on a tape. For details, refer to
Picture effect ([PICT. EFFECT], p. 75).

Overlaying still images on movies
on a tape – MEMORY MIX

You can superimpose a still image you have
recorded on a “Memory Stick Duo” over the
movie you are currently recording on a tape.
You can then record the superimposed
pictures on a tape or a “Memory Stick Duo.”
(You cannot superimpose a still image on a
tape which you have already finished
recording.)

[M

T

CAM LUMI.] (Memory Luminance

key)

You can swap the brighter (white) area of a still
image into a movie. To use this function, have a
still image of an illustration or title handwritten
on white paper recorded on a “Memory Stick
Duo” beforehand.

[CAM

T

M CHROMA] (Camera Chroma

key)

You can superimpose a movie on top of a still
image, such as an image which can be used as

background. Shoot the movie with the subject
against a blue background. Only the blue area of
the movie will be swapped with the still image.

[M

T

CAM CHROMA] (Memory Chroma

key)

You can have the movie swap into the blue area
of a still image such as an illustration or into a
frame with a blue area enclosed by the frame.

1

Check that you have a “Memory Stick
Duo” with the still image to be
superimposed and a tape (only if you
are recording on a tape) in your
camcorder.

2

Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode
(when you are recording on a tape) or
the CAMERA-MEMORY mode
(when you are recording on a
“Memory Stick Duo”).

3

Touch .

4

Touch [MEMORY MIX].

If the item is not displayed on the screen,
touch

/

. If you cannot find it, touch

[MENU], and select it from the

(PICT.

APPLI.) menu.

Still image

Movie

Still image

Blue

Movie

Still image

Movie

Blue

Advertising