Sony DCR-PC350 - Manual (Page 60)

Playback 60
Playing the picture on
a TV
Connect your camcorder via the Handycam
Station or the A/V jack of your camcorder to
a TV using the supplied A/V connecting
cable.
Connect the supplied AC Adaptor to the wall
outlet for the power supply (p. 16).
Refer also to the instruction manuals supplied
with the devices to be connected.
To copy to another tape, see page 94.
* By using an S video cable (optional), higher quality
DV format pictures can be produced.
When there is an S VIDEO jack on the device to be
connected, connecting the S video cable (optional)
to the S VIDEO jacks on both your camcorder or the
Handycam Station and the device instead of using
the yellow plug is recommended. The audio will not
be output when you connect with the S video plug
alone.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE.
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V connecting
cable to the video input jack and connect the
white or the red plug to the audio input jack of
your TV or VCR.
When you want to play the sound in monaural
mode, use a connecting cable (optional) for that
purpose.
b Note
• Both the camcorder and the Handycam Station have
one A/V jack (for the A/V connecting cable) and one
S VIDEO jack (for the S video cable). Do not
connect the same cables to both your camcorder and
the Handycam Station. The image might be
distorted.
IN
Signal flow
A/V jack
A/V connecting cable (supplied)
Yellow
White
Red
VCRs or TVs
S VIDEO jack