Sony LF-X11 - Manual (Page 24)

Ad
v
a
nce
d
Bas
e
Sta
tion S
e
tting
s
24
This section explains how to make advanced
settings for using the NetAV function.
Set the port of the Base Station when the NetAV
function is to be used.
1 If there are multiple Base Stations and 5021 is
already being used, change the port number of
the NetAV server.
You can specify port numbers in the range
5021 to 5999.
At the time of purchase, this item is set to 5021.
2 Select this to save the changes.
Setting up a router incompatible
with the UPnP function
When port forwarding needs to be set on the router,
follow the procedure below to set the Base Station’s
IP address.
z Tip
The IP address, subnet mask, and default gateway used
in the procedure below are only examples. Before you
configure these settings, check the IP address settings
of the router in use.
1
Set [IP Address Settings] to [Manual]
in the [Internet Connection]
(
1 page 23) frame, and then enter
the following information.
IP Address: 192.168.0.64
*1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
*2
*1
Example when the IP address of the router
is 192.168.0.1. If the IP address of the
router is 192.168.1.1, enter 192.168.1.64
for the IP address. If you are using multiple
Base Stations, set a different setting for
each Base Station, such as 64 and 65.
*2
Example when the IP address of the router
is 192.168.0.1. If the IP address of the
router is 192.168.1.1, enter 192.168.1.1
for the default gateway.
2
Set [Manual] for [DNS Configuration]
and enter the following information.
DNS1: 192.168.0.1
*3
DNS2: It is OK to leave the field blank.
*3
Example when the IP address of the router
is 192.168.0.1. If the IP address of the
router is 192.168.1.1, enter 192.168.1.1
for DNS1.
3
Select [Set], and then press the
button.
4
Set port forwarding on the router.
Open the settings menu for the router in use,
and then enter the port number that you set
under [NetAV Settings].
For details, refer to the instructions supplied
with your router.
Setting Up to Watch
TV Away From
Home
You do not need to configure the settings on
pages 24 to 25 if you performed "Easy Setup"
(
1 pages 14 to 16).
NetAV Settings