Sony KE-42M1 - Manual (Page 13)

13
Installing the TV
Button Description
0 Input Select
Buttons
qa VOL +/–
qs RESET
qd PIC OFF
qf POWER
qg DISPLAY
qh SLEEP
qj 0 - 9 ENTER
qk MENU
ql
w; F1
wa F2
ws CH +/–
Press to select the video equipment
connected to the TV’s video inputs.
TV: Press to select the TV to watch the
TV programs.
VIDEO 1/2/3: Press repeatedly to cycle
through the video equipment connected
to the VIDEO IN 1 , the VIDEO IN 2
and the VIDEO IN 3.
If the video label is selected as “Skip,”
the selected input will be skipped from
the cycle.
VIDEO 4: Press to select the video
equipment connected to the HD/DVD
IN 4.
VIDEO 5: Press to select the video
equipment connected to the HDMI IN
5.
Press to adjust the volume.
Press to reset the settings to the factory
defaults. See pages 60 and 62. Also
used to clear Channel Label.
Press to turn off the TV screen. For
details, see “Using the Picture off
Function” on page 48.
Press to turn on and off the TV.
Press once to display the current
channel number, and channel label. If
set, the current channel number will
display for 10 seconds.
Press repeatedly until the TV displays
the time in minutes (15, 30, 45, 60 or
90) that you want the TV to remain on
before shutting off. To cancel Sleep
Timer, press SLEEP repeatedly until
Sleep Off appears.
Press 0 - 9 to select a channel; the
channel changes after 2 seconds. Press
ENTER to change channels
immediately.
Press to display the menu. Press again
to exit from the menu. For details, see
page 37.
Press V/v/B/b to move the on-screen
cursor. To select an item, press .
Press to select the function of your
video equipment which is programmed
on the TV’s remote control.
Press to select the function of your
video equipment which is programmed
on the TV’s remote control.
Press to scan through channels. To scan
quickly through channels, press and
hold down either CH.
Button Description
wd
When FUNCTION is switched on SAT/CABLE
TV/SAT
wf MTS/SAP
When FUNCTION is switched on SAT/CABLE
GUIDE
Press to select the sound effect modes:
TruSurround, Off. The sound effect
modes can be also accessed in the
Audio menu. For more details, see
“Selecting the Effect Mode” on page
43.
Press to switch between the TV and the
satellite receiver.
Press repeatedly to cycle through the
Multi-channel TV Sound (MTS)
options: Stereo, Auto SAP (Second
Audio Program), and Mono. The MTS
setting can be also accessed in the
Audio menu. For more details, see
“Selecting Stereo or Bilingual
Programs” on page 62.
Press to display the program guide of
your satellite program provider.