After recording, Using the zoom feature, Recording a picture – Sony DCR-TRV520 User Manual

Page 18

Advertising
background image

18

After recording

(1) Set the POWER switch to OFF (CHARGE).
(2) Close the LCD panel.
(3) Eject the cassette.

Using the zoom feature

Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom.
Using the zoom function sparingly results in better-looking recordings.
“T” side: for telephoto (subject appears closer)
“W” side: for wide-angle (subject appears farther away)

Zoom greater than 25

×

is performed digitally. To activate digital zoom, select the digital

zoom power in D ZOOM in the menu settings. (p. 64)
The picture quality deteriorates as the picture is processed digitally.

Notes on digital zoom
•Digital zoom starts to function when zoom exceeds 25

×

.

•The picture quality deteriorates as you go toward the “T” side.

When you shoot close to a subject
If you cannot get a sharp focus, move the power zoom lever to the “W” side until the
focus is sharp. You can shoot a subject that is at least about 2 feet 5/8 inch (about 80 cm)
away from the lens surface in the telephoto position, or about 1/2 inch (about 1 cm)
away in the wide-angle position.

Recording a picture

The right side of the bar shows the digital
zooming zone.
The digital zooming zone appears when you
select the digital zoom power in D ZOOM in
the menu settings.

T

W

T

W

W

T

T

W

Advertising
This manual is related to the following products: