Sony DCR-TRV520 - Manual (Page 86)

86
S VIDEO LANC DV
S VIDEO
VIDEO
OUT
TV
VCR
S VIDEO
AUDIO / VIDEO
Recording an image from a tape as a still image
Recording a still image from other equipment
(1) Set the POWER switch to VTR and set DISPLAY to LCD in the menu settings.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The image from TV or VCR appears on the LCD or in the viewfinder.
(3) Follow the steps 3 and 4 on page 85.
Using the A/V connecting cable
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the TV or VCR.
Using the i.LINK cable (the DV connecting cable)
: Signal flow
: Signal flow
(not supplied)
DV OUT
DV IN/OUT