Sony DCR-TRV520 - Manual (Page 67)

67
Customizing Your Camcorder
Changing the menu settings
Icon/item
LCD B. L.
LCD COLOR
VF B.L*
CONTINUOUS
QUALITY
FLD./FRAME
PRINT MARK
PROTECT
SLIDE SHOW
DELETE ALL
FORMAT
PHOTO SAVE
Mode
z
BRT NORMAL
BRIGHT
—
z BRT NORMAL
BRIGHT
z OFF
MULTI SCRN
z FINE
STANDARD
z FIELD
FRAME
z OFF
ON
z OFF
ON
z RETURN
FORMAT
Meaning
To set the brightness on the LCD screen normal
To brighten the LCD screen
To adjust the color on the LCD screen, turning
the SEL/PUSH EXEC dial to adjust the
following bar
To set the brightness in the viewfinder normal
To brighten viewfinder
Not to record continuously
To record 9 images continuously (p. 78)
To record still images in the fine image quality
mode, using the “Memory Stick”
To record still images in the standard image
quality mode, using the “Memory Stick”
To record moving subjects
To record stopping subjects in high quality
To cancel print marks on still images
To write a print mark on the recorded still
images you want to print out later
Not to protect still images
To protect selected still images against
accidental erasure (p. 97)
To play back images in a continuous loop
(p. 95)
To delete all the images (p. 99)
To cancel formatting.
To format an inserted “Memory Stick.”
1. Select FORMAT with the SEL/PUSH EXEC
dial, then press the dial.
2. Turn the SEL/PUSH EXEC dial to select
FORMAT, then press the dial.
3. After EXECUTE appears, press the SEL/
PUSH EXEC dial. FORMATTING appears
during formatting. COMPLETE appears when
formatting is finished.
To duplicate still images (p. 87)
POWER
switch
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
VTR
* DCR-TRV525 only
Notes on LCD B.L. and VF B.L.
• When you select BRIGHT, battery life is reduced by about 10 percent during recording.
• When you use power sources other than the battery pack, BRIGHT is automatically
selected.
Notes on formatting
• Supplied or optional “Memory Stick”s have been formatted at factory. Formatting with this
camcorder is not required.
• Do not turn the POWER switch or press any button while the display shows
FORMATTING.
• You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick” is set
to LOCK.
• Format again if the message appears.
Formatting erases all information on the “Memory Stick”
Check the contents of the “Memory Stick” before formatting.
• Formatting erases sample images on the “Memory Stick.”
• Formatting erases the protected image data on the “Memory Stick.”
to lighten to darken
VTR
CAMERA
MEMORY