Sony KV-27FS120 - Manual (Page 20)

12
KV-27FS120
4-101-456-22(1)
Co
nnections
Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver
using Composite Video (VIDEO/AUDIO L(MONO), R)
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna
(optional connection to view local channels or broadcast).
3 Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your satellite receiver
b) the VHF/UHF jack on the TV
4
Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the
VHF/UHF IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
the AUDIO/VIDEO IN on your TV.
6
Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your
satellite receiver to the AUDIO/VIDEO IN on your TV.
Optional connection
❏ To view from the satellite receiver or VCR, select the video input to which your satellite
receiver or VCR is connected by pressing
on the remote control.
VIDEO
LINE
IN
LINE
OUT
AUDIO L AUDIO R
L
R
L
R
Y
B
P
P
R
VIDEO 1 VIDEO 1 VIDEO 2 VIDEO 2
1 3 4
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO Y
P B
P R
L
R
Satellite receiver
1
2
Satellite antenna
cable
VCR
4
5
6
3b 3a
Splitter
From
cable or
antenna
Rear of TV
Video (yellow)
Audio R (red)
Audio L (white)
Optional
For Viewing
For Recording
For Playback
For Viewing
TV/VIDEO