Sony HDR-CX500V - Manual (Page 50)

0
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
: Signal flow
Type Camcorder Cable TV MENU setting
[OUTPUT SETTINGS]
(under [GENERAL
SET] category) 
[COMPONENT] 
[480i] (p. 96)
[OUTPUT SETTINGS]
(under [GENERAL
SET] category)  [TV
TYPE]  [16:9]/[4:3] *
(p. 95)
Notes
If you connect only component video plugs, audio signals are not output. Connect the white and red
plugs to output audio signals.
[OUTPUT SETTINGS]
(under [GENERAL
SET] category)  [TV
TYPE]  [16:9]/[4:3] *
(p. 95)
Notes
When the S VIDEO plug (S VIDEO channel) is connected, audio signals are not output. To output audio
signals, connect the white and red plugs to the audio input jack of your TV.
This connection produces higher resolution images compared with the A/V connecting cable (Type ).
[OUTPUT SETTINGS]
(under [GENERAL
SET] category)  [TV
TYPE]  [16:9]/[4:3] *
(p. 95)
* Set [TV TYPE] according to your TV.
When connecting to your TV via a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable.
Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the





(White)
(Red)
(Yellow)
A/V connecting cable
(supplied)
A/V connecting cable with
S VIDEO (sold separately)
(White)
(Red)
(Yellow)
(Green) Y
(Blue) P
B
/C
B
(Red) P
R
/C
R
(White)
(Red)
Component A/V cable (supplied)