Sony HDR-CX500V - Manual (Page 66)


Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
 Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
 Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable  (supplied) or an A/V
connecting cable with S VIDEO
 (sold separately).
Connect your camcorder to the input jacks
of the recording device.
 Start playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals supplied



with your recording device for details.
 When dubbing is finished, stop
the recording device, and then
your camcorder.
Notes
Since dubbing is performed via analog data
transfer, the image quality may deteriorate.
You cannot dub images to recorders connected
with an HDMI cable.
To hide the screen indicators (such as a counter,
etc.) on the screen of the monitor device
connected, touch (MENU)  
[OUTPUT SETTINGS] (under [GENERAL
SET] category)  [DISP OUTPUT]  [LCD
PANEL] (the default setting)  
 .
To record the date/time, coordinates (HDR-
CX500V/CX520V), or camera settings
data, touch (MENU)  
[PLAYBACK SET] (under [PLAYBACK]
category)  [DATA CODE]  a desired
setting    . In
addition, touch (MENU)  
[OUTPUT SETTINGS] (under [GENERAL
SET] category)  [DISP OUTPUT]  [V-
OUT/PANEL]    .
When the screen size of display devices (TV,
etc.) is 4:3, touch (MENU)  
[OUTPUT SETTINGS] (under [GENERAL
SET] category)  [TV TYPE]  [4:3] 
  .
When you connect a monaural device, connect
the yellow plug of the A/V connecting cable
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.







A/V Remote Connector
Signal flow
S VIDEO
VIDEO
(Yellow)
(White)
AUDIO
(Red)
Input
(Yellow)