Getting started, Step 1: charging the battery pack, Y pack (19) – Sony HDR-CX500V User Manual
Page 19: Ge) lamp (19), Dc in jack (19)
1
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
Getting started
Step 1: Charging the battery pack
You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your
camcorder.
You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.
1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge)
lamp turns off when the battery pack is fully charged.
Battery pack
DC IN jack
DC plug
AC Adaptor
Power cord
(Mains lead)
/CHG (flash/charge)
lamp
To the wall outlet
(wall socket)
Access lamp