Sony HDR-CX500V - Manual (Page 23)


Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
[DATE/TIME]    .
You can turn off the operation beeps by touching (MENU)   [SOUND/DISP SET]
(under [GENERAL SET] category)  [BEEP]  [OFF]    .
If the button you touch does not react correctly, calibrate the touch panel (p. 123).
Once the clock is set, the clock time is automatically adjusted with [AUTO CLOCK ADJ] and [AUTO
AREA ADJ] set to [ON] (p. 97). The clock may not be adjusted to the correct time automatically,
depending on the country/region selected for your camcorder. In this case, set [AUTO CLOCK ADJ] and
[AUTO AREA ADJ] to [OFF] (HDR-CX500V/CX520V).
To turn off the power
Close the LCD screen. The (Movie) lamp flashes for a few seconds and the power is turned
off.
You can turn off your camcorder also by pressing POWER.
When [POWER ON BY LCD] (p. 99) is set to [OFF], turn off your camcorder by pressing POWER.
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
Touch (MENU)   [CLOCK/ LANG] (under [GENERAL SET]
category)  [ LANGUAGE SET]  a desired language  
 .





POWER button