Sony HDR-CX500V - Manual (Page 64)


Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
The movie plays back on the camcorder
screen.
You can also operate by the camcorder
screen.
 Touch [END]  [EJECT DISC] on the
camcorder screen and remove the disc
after the operation is completed.
 Touch and disconnect the USB
cable.
Notes
Be sure to turn on the camcorder. The DVD
writer is powered from the camcorder.
You can use [DISC BURN OPTION] to create
many of the same disc.
Do not do any of the following when creating
a disc.
Turn off the camcorder
Close the LCD screen of the camcorder
Disconnect the USB cable or the AC adaptor
Subject the camcorder to mechanical shock
or vibration
Eject the “Memory Stick PRO Duo” media
from the camcorder
You cannot add movies to a created disc.
Play the created disc to make sure dubbing was
performed correctly before deleting the movies
on your camcorder.
If [Failed.] or [DISC BURN failed.] appears on
the screen, insert another disc into the DVD
writer and perform the DISC BURN operation
again.
The created high definition (HD) image quality
disc can be played back only on AVCHD format
compatible devices. You can also play back the
disc with a DVD writer connecting with your
camcorder.
The high definition image quality (HD) disc
that you created should not be used in DVD
players/recorders. Because DVD players/
recorders are not compatible with the AVCHD
format, DVD players/recorders may fail to eject
the disc.
Tips
If the total memory size of movies to be burnt
by the DISC BURN operation exceeds that of
the disc, disc creation stops when the limit is
reached. The last movie on the disc may be
cut off.

















Disc creation time to dub movies to the limit
of the disc is about 20 to 60 minutes. It may
take more time depending on the recording
mode or the number of scenes. Also, if high
definition image quality (HD) is converted to
standard definition image quality (SD), image
quality conversion takes longer than the actual
recording.
You can play back created standard definition
(SD) image quality discs on any DVD player. If
playback is not possible for any reason, connect
the camcorder to the DVD writer, and then
play back.
The disc mark appears on the camcorder
screen.
Creating a high definition image
quality (HD) disc with a DVD writer,
etc., other than DVDirect Express
Use USB cable to connect your camcorder
to a disc creation device, which is
compatible with high definition image
quality (HD) movies, such as a Sony DVD
writer. Refer also to the instruction manuals
supplied with the device to be connected.
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 20).
Sony DVD writer may not be available in some
countries/regions.
 Turn on your camcorder, and
connect a DVD writer, etc. to the
 (USB) jack of your camcorder
with the USB cable (supplied).




