Sony PCG-FXA49 - Manual (Page 37)

Connecting to a LAN
37
Connecting to a LAN
You can connect your notebook to 10BASE-T and 100BASE-TX-type Local
Area Networks (LANs). For the detailed settings and devices needed to connect
to the network, ask your network administrator.
Setting up your Ethernet connection
To connect to the network
1 Click Start, select My Computer, and then click My Network Places under
the “Other Places” heading.
2 Click “Add a network place” under the Network Tasks heading, or click “Set
up a home or small office network,” depending on your configuration.
3 Depending on your choice, either the “Add Network Place Wizard” or the
“Network Setup Wizard” is displayed.
4 Follow the on-screen instructions.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the Ethernet
jack. Do not connect any other type of network cable or phone cable.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
Ethernet
jack