Sony DSC-V1 User Manual
Page 54
54
a
Set the mode dial to SET UP.
The SET UP screen appears.
b
Select
(Camera 2) with
v
/
V
and [Bracket Step] with
B
/
v
,
then press
B
.
c
Select the desired bracket step
value with
v
/
V
, then press
z
.
±1.0EV
: Shifts the exposure value by
plus or minus 1.0EV.
±0.7EV
: Shifts the exposure value by
plus or minus 0.7EV.
±0.3EV
: Shifts the exposure value by
plus or minus 0.3EV.
d
Set the mode dial to
,
P, S,
A, M or SCN.
e
Press MENU.
The menu appears.
f
Select [Mode] (REC Mode) with
b
/
B
, then select [Exp Brktg]
with
v
/
V
.
g
Shoot the image.
To return to normal mode
Select [Normal] in step 6.
•
You cannot use the flash in this mode.
•
During shooting in this mode, the images are
not displayed on the screen. Compose the
image before pressing the shutter button.
•
The focus and white balance are adjusted for
the first image, and these settings are also used
for the other images.
•
When the exposure is manually adjusted
(page 49), the adjusted value is used for the
center value.
•
The recording interval is approximately
0.5 second.
•
If the subject is too bright or too dark, you may
be unable to shoot properly with the selected
bracket step value.
•
You cannot select certain shutter speeds*.
* When [ISO] is [800]:
Shutter speeds of 1/25 second or slower
When [ISO] is other than [800]:
Shutter speeds of 1/6 second or slower
2