Sony KDE-55XBR950 - Manual (Page 48)

46
Setup
Digital Satellite
Receiver with
DVI-HDTV connector To connect a digital Satellite Receiver with DVI-HDTV connector
1
Use a DVI cable to connect the Digital Satellite Receiver’s DVI-HDTV
output connector to the TV’s DVI-HDTV input connector (VIDEO 6).
2 Use an audio cable to connect the Digital Satellite Receiver’s audio
output jacks to the TV’s VIDEO 6 audio input jacks.
Notes on Using This Connection
The DVI-HDTV connector carries only the video signal, you
also need to connect the audio cables for sound.
S VIDEO
Y
P B
P R
L
R
Y
P B
P R
AUDIO
L
R
L
R
AUDIO
R - AUDIO - L
VIDEO IN 3 6 1 AUDIO OUT
(VAR/FIX)
CONTROL S
SUB WOOFER
OUT
(VAR)
OUT
IN
OPTICAL OUT
VIDEO
L
AUDIO
DVI–HDTV DVI–HDTV IN
HD/DVD IN
4 5
(1080i/720p/480p/480i)
(MONO)
R
(1080i/720p/480p)
Rear of Media Receiver Unit
Audio cable
Digital Satellite Receiver
DVI cable
To Do This ... Do This ...
Watch the digital satellite receiver Press TV/VIDEO repeatedly to select the digital satellite receiver input (VIDEO 6 in
the illustration).
Label video inputs to easily
identify equipment connected to
the TV See the instructions for setting up Video Labels on page 113.
Do not leave the Electric Program Guide and display indication
turned on.
Do not connect the PC to the TV with the DVI cable.