Sony MVC-CD1000 - Manual (Page 52)

masterpage:Left
filename[D:\MVC-CD1000 kaihan\3062473121\3062473121MVCCD1000UC\02GB-
MVCCD1000UC\07adv.fm]
52
model name1[MVC-CD1000]
[3-062-473-12(1)]
To cancel PROGRAM AE
Press PROGRAM AE repeatedly until
the indicator on the LCD screen or on
the viewfinder goes out.
Notes
• You can focus only on distant subjects in
Landscape mode.
• In Panfocus mode, the zoom position is set
to the W side and focus is fixed.
• When you record in Twilight plus mode,
we recommend that you use a tripod to
prevent shaking.
• Set the forced flash when you use the
flash in the following modes:
– Twilight mode
– Twilight plus mode
– Landscape mode
• You cannot use the PROGRAM AE
function when [REC MODE] is set to
[TEXT].
• If the setting is not appropriate in Aperture
priority mode and Shutter speed priority
mode, the setting value indicator on the
LCD screen or on the viewfinder flashes
when you press the shutter button. In this
case, reset the value.
• If you select a slow shutter speed in
Twilight plus mode or select Shutter speed
priority mode, the image may not be clear.
Using the Spot light
–
metering function
Select this mode when there is
backlight or when there is strong
contrast between the subject and the
background, etc.
Press SPOT METER to activate the
spot light-metering function. Position
the point you want to record at the spot
light-metering cross hair.
Twilight plus mode
Increases the effectiveness of the
twilight mode function.
Landscape mode
Focuses only on a distant subject to
record landscapes, etc.
Panfocus mode
Changes the focus quickly and
simply from a close subject to a
distant subject.
SPOT
METER
LCD screen/viewfinder
Spot light-metering
cross hair
01cov.book Page 52 Wednesday, July 19, 2000 10:33 AM