Sony MVC-CD1000 - Manual (Page 9)

masterpage:Right
filename[D:\MVC-CD1000 kaihan\3062473121\3062473121MVCCD1000UC\02GB-
MVCCD1000UC\03pre.fm]
Getting
sta
rted
9
model name1[MVC-CD1000]
[3-062-473-12(1)]
Charging the battery pack
When the camera is turned on, you cannot charge the battery pack. Be sure to turn off
the power of the camera.
Battery remaining indicator
The LCD screen or viewfinder on the camera shows the remaining time for which
you can still record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
1 Insert the battery pack into your camera.
2 Open the DC IN cover and connect the DC connecting plug to the
DC IN jack of your camera with the
v mark facing up.
3 Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
The POWER ON/OFF (CHG) lamp (amber) above the control button lights up
when charging begins. When the POWER ON/OFF (CHG) lamp goes off,
normal charge is completed. For full charge , which allows you to use the
battery longer than usual, leave the battery pack inserted for about one hour
after normal charge is completed.
1
2
3
AC-L10A/L10B/L10C
AC power adaptor
Power cord
(mains lead)
Battery pack
to a wall outlet
(mains)
01cov.book Page 9 Wednesday, July 19, 2000 10:33 AM