Sony HDR-GW77V - Manual (Page 23)


US
G
etting star
ted
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
Select  [Setup]  [ General Settings]  [Language Setting]  a desired language.
To turn off the power
Close the LCD screen.
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (), and then adjust the angle
().
To turn off the beep sound
Select  [Setup]  [ General Settings]  [ Beep ]  [Off].
Notes
The recording date and time are recorded automatically on the recording media. They are not displayed
during recording. However, you can check them as [Data Code] during playback. To display them, select
 [Setup]  [ Playback Settings]  [Data Code]  [Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area
ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to
[Off] (HDR-GW77V) (p. 49).

To set the date and time again: [Date & Time Setting] (p. 49)



 90 degrees to the camcorder
 270 degrees (max.)