Sony PCG-XG9 - Manual (Page 67)

Connecting a Printer 55
Connecting a Printer
You can connect the printer to the Mini Docking Station attached to your
computer to print documents.
To connect a printer
❑
Use the symbol to locate the Printer connector. Plug the printer
cable (supplied with the printer) into this port on the computer.
✍
Before you connect the printer, turn off your computer and disconnect the AC adapter and
power cord from the electrical outlet.
Plug the power cord after finishing all the connections.
Turn on the peripheral devices before turning on your computer.
If you are using a printer that does not support Windows 98, it may not function properly.
You can connect a printer while the floppy disk drive is in use.
When using a USB printer, connect it to the USB connector of your computer or of the Mini
Docking Station.
See the manual that came with your printer for more information on installation and use.
Before using the printer, you may need to change the Printer setting in the Sony Notebook
Setup software. See “Displaying the Sony Notebook Setup Screen” in the
Customizing Your
Notebook Computer manual.
Printer
Power cord
Printer cable
(supplied with the printer)
to
Printer