Sony STR-DA5800ES - Manual (Page 14)

14 US
letters light up to indicate the level. Since
the L.F.E. signal is not recorded in all
parts of the input signal, the bar indication
will fluctuate (and may turn off) during
playback.
I Speaker system indicator
(page 47)
J BI-AMP (page 94)
K D.C.A.C. (page 99)
Lights up when the measurement results
of the “Auto Calibration” function are
applied.
L D.L.L. (page 106)
M H.A.T.S. (page 114)
N S.OPT.
Lights up when the sound optimizer
function is activated (page 66).
O Tuning indicator
Lights up when the receiver tunes to a
radio station.
ST
Stereo reception
MONO
FM mode is set to the monaural mode.
PRESET
The tuning mode is set to the preset mode.
P VOLUME
Displays the current volume.
Q D.RANGE
Lights up when dynamic range
compression is activated.
R Dolby Digital Surround indicator
Lights up with one of the respective
indicators when the receiver is decoding
the corresponding Dolby Digital format
signals.
;D
Dolby Digital
;D+
Dolby Digital Plus
;D EX
Dolby Digital Surround EX
S DTS-HD indicator
Lights up when the receiver is decoding
DTS-HD.
DTS-HD
Lights up constantly with the one of the
following indicators.
MSTR
DTS-HD Master Audio
HI RES
DTS-HD High Resolution Audio
T ;TrueHD
Lights up when the receiver is decoding
Dolby TrueHD.
U Dolby Pro Logic indicator
Lights up with one of the respective
indicators when the receiver performs
Dolby Pro Logic processing. This matrix
surround decoding technology can
enhance input signals.
;PL
Dolby Pro Logic
;PLII
Dolby Pro Logic II
;PLIIx
Dolby Pro Logic IIx
;PLIIz
Dolby Pro Logic IIz
V A.P.M. (page 101)
Lights up when the A.P.M. (Automatic
Phase Matching) function is activated.
W EQ
Lights up when the equalizer is activated.
X L-PCM
Lights up when Linear PCM (Pulse Code
Modulation) signals are input.
Y DSD
Lights up when the receiver is receiving
DSD (Direct Stream Digital) signals.
Z DTS(-ES) indicator
Lights up when DTS or DTS-ES signals
are input.
DTS
Lights up when the receiver is decoding
DTS signals.