Sony WEGA KV-20FV300 User Manual
Page 15
Connecting Your TV
7
TV, VCR, and Cable Box
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack
on your VCR.
3
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting
Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
If you will be controlling all channel selection through your cable box, you should consider
using the Channel Fix feature by setting your TV to channel 3 or 4 (see page 22).
You can use the
button to switch between the VHF/UHF and VIDEO inputs.
For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO
does not provide sound; the audio cables must still be connected.
3
From
Optional connection
Cable Box
1
VCR
2
Rear of TV
Video (yellow)
Audio R (red)
Audio L (white)
cable