Sony WEGA KV-20FV300 - Manual (Page 16)

8
Operating Instructions
TV and Satellite Receiver
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.


You can use the button to switch between the VHF/UHF and VIDEO inputs.


For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO
does not provide sound; the audio cables must still be connected.
Satellite Receiver
Satellite
antenna
cable
1
2
3
From
cable/
antenna
Rear of TV
Video (yellow)
Audio R (red)
Audio L (white)