Sony SAT-T60 - Manual (Page 13)

13 Parts, Controls, and Functions
Ge
tting S
ta
rte
d
K BACK button
Plays a program in reverse fast search mode. Shows a program in reverse
frame-by-frame when in pause mode. Press up to three times to increase
the speed of the search or frame-by-frame viewing.
L (Instant) REPLAY button
Replays the previous eight seconds of the current program.
M VOL (volume) +/– buttons
Controls the volume of your TV. See “Programming Your Remote Control”
on page 27 to set up the Remote Control to operate your TV or audio
system.
N POWER/TV button
Turns your TV or audio system on and off. See “Programming Your
Remote Control” on page 27 to set up the Remote Control to operate your
TV or audio system.
O POWER/SAT button
Turns the Satellite Receiver on and off. When the power to the Satellite
Receiver is off, the antenna (or cable) signal passes through to your TV (see
VHF/UHF (SAT) OUT on page 11).
P Remote Active indicator
Flashes while the Remote Control is transmitting signals or being
programmed.
Q ENTER/JUMP button
Selects the currently entered number as the channel to watch, or jumps
back to the previously set channel.
R TV/VIDEO button
Switches between the various inputs of your TV. See “Programming Your
Remote Control” on page 27 to set up the Remote Control to operate your
TV.
S DISPLAY button
Opens a Channel Banner that shows information about the current
program. You can select either the grid-type guide or TiVo guide by
pressing this button while the Program Guide is open.
continued