Sony DVP-NS400D - Manual (Page 29)

Hook
ups
29
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 65).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 21 to 24 (
through ). Each of these are the default settings and do not need to be adjusted when you
first connect the player. Refer to page 65 for using the Setup Display.
Audio Connection (page 21 to 24)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 70).
•
If “ENHANCED” or “SOFT” is selected in “CENTER SPEAKER EQ,” it makes the spoken
track sound clear (page 70).
•
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect the amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page 71).
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 70).
Enjoying the surround sound effects
Item You select Page
DISTANCE
BALANCE
LEVEL Set according to the connected
speakers 72
Item You select Page
DOWNMIX DOLBY SURROUND 70
DIGITAL OUT ON 70
Item You select Page
DOWNMIX DOLBY SURROUND 70
B
D
A
B-1
B-2 C-2 D-2
C-1 D-1