Sony DVP-NS400D - Manual (Page 50)

50
SURROUND Mode Settings
You can enjoy surround sounds while
playing discs including Dolby Digital DVDs,
even if you have only 2 or 4 speakers. Select
surround mode that best suits your speaker
setup.
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(SURROUND), then press ENTER.
The options for SURROUND appear.
3
Press X/x to select one of the
SURROUND sounds.
Refer to the following explanations
given for each item.
For 2 speaker setups
•
TVS DYNAMIC
•
TVS WIDE
•
TVS NIGHT
•
TVS STANDARD
For 4 (or more) speaker setups
(If you select “NONE” in the setting of
“REAR” in “SPEAKER SETUP”(page
72), you cannot select these modes.)
•
NORMAL SURROUND
•
ENHANCED SURROUND
•
VIRTUAL REAR SHIFT
•
VIRTUAL MULTI REAR
•
VIRTUAL MULTI DIMENSION
4
Press ENTER.
To cancel the setting
Select “OFF” in Step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
When you connect only 2 front speakers,
TVS (TV Virtual Surround) lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers (L: left, R:
right) without using actual rear speakers.
Select one of the following modes:
ENTER
X / x
DISPLAY
SURROUND
TVS DYNAMIC
OFF
TVS WIDE
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
DVD
PLAY
For 2 speaker setups