Sony STR-DE898 - Manual (Page 43)

Oth
e
r Operatio
ns
masterpage:Right
lename[D:\Sony
SEM\Data_DE898_Revision3\J9050152_2580791113DE898U\2580791113\GB070TH_STR-
DE898-U.fm]
43 GB
model name1[STR-DE898]
[2-580-791-11(3)]
Recording on a video tape
You can record from a VCR, a TV or a DVD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
1
Select the program source to be
recorded.
2
Prepare the component for playing.
For example, insert a video tape you want to
record into VCR.
3
Insert a blank video tape into the VCR
(VIDEO 1 or VIDEO 2) for recording.
4
Start recording on the recording VCR,
then start playing the video tape or
DVD you want to record.
Tip
You can record the sound from any audio source onto
a video tape while copying from a video tape or DVD.
Locate the point where you want to start recording
from another audio source, select the program source,
then start playback. The audio from that source will be
recorded onto the audio track of the video tape instead
of the audio from the original medium. To resume
audio recording from the original medium, select the
video source again.
Notes
• You cannot record a digital audio signal using a
component connected to the analog VIDEO 1
AUDIO OUT or VIDEO 2 AUDIO OUT jacks.
• Make sure to make both digital and analog
connections to the TV/SAT and DVD inputs. Analog
recording is not possible if you make only digital
connections.
• The analog audio signals of the current input are
output from the VIDEO 1 AUDIO OUT or VIDEO 2
AUDIO OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from VIDEO 1 AUDIO OUT or VIDEO 2
AUDIO OUT jacks even when MULTI CH IN is
being used. The analog audio signals of the current or
previously used input are output.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the sources.
You can select the analog audio signals you
want to output to a stereo amplifier in another
room or zone.
Press 2ND ZONE repeatedly to select the
analog audio signals you want to output.
Each time you press the button, the audio source
changes cyclically as follows:
SOURCE
*1 t
MD/TAPE
t
SA-CD/CD
t
TUNER
*2
*1
The audio signals of the current input is output.
*2
The audio signals of the last selected TUNER
function (AM/FM) is output.
Tips
• Only signals from components connected to the
analog input jacks are output through the 2ND ZONE
OUT jacks. No signals are output from components
connected to only the digital input jacks.
• When “SOURCE” is selected, the signals input to the
MULTI CH IN jacks are not output from the 2ND
ZONE OUT jacks even when MULTI CH IN is
selected. The analog audio signals of the current
input are output.
Listening to the sound in
another zone
L
R
IN
S-VIDEO
IN
VIDEO IN
TV/SAT
AUDIO IN
MONITOR
L
R
L
R
L
R
FRONT SURROUND
SURR
BACK
DVD VIDEO 2
VIDEO IN
AUDIO IN
VIDEO OUT
AUDIO OUT
VIDEO IN
AUDIO IN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
R
VIDEO 1
TV/SAT
IN
DVD
IN
Y
P R /C R
/R–Y
P B /C B
/B–Y
L
R
L
VIDEO OUT
AUDIO OUT
S-VIDEO
OUT
VIDEO OUT VIDEO IN
AUDIO IN
R
L
OUT
2ND ZONE PRE OUT
MONITOR
OUT
SUB
WOOFER
SUB
WOOFER
CENTER
COMPONENT VIDEO
MULTI CH IN TAPE
ASSIGNABLE
CENTER
+ –
SPE
2ND ZONE
continued
GB01COV_STR-DE898-U.book Page 43 Tuesday, March 15, 2005 12:20 PM