Using as a photo frame, Preparing the remote control – Sony DPP-F700 User Manual

Page 20

Advertising
background image

20

GB

Using as a photo frame

Preparing the remote
control

The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.

Using the remote control

Point the top end of the remote control towards
the remote sensor on this unit.

Replacing the battery of the
remote control

If the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.

1

Press the tab in.

2

Pull the battery holder out.

3

Insert a new battery and slide the
battery holder back into the remote
control.

Insert the battery so that “+” is facing
upwards.

Notes

• When the lithium battery becomes weak, the

operating distance of the Remote control may
shorten, or the Remote control may not function
properly. In this case, replace the battery with a
Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.

• Using a battery other than the specified one may

result in the battery rupturing.

Protective sheet

Remote
sensor

WARNING

Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.

Advertising