Sony PCG-K20P - Manual (Page 67)

If the Data encryption (WEP enabled) check box is not available:
1. Select an authentication method from the Network Authentication menu.
2. Select a data encryption method from the Data Encryption menu.
5. Click to cancel the The key is provided for me automatically check box.
6. Type the network key in the Network key box if it is required by the selected authentication method.
7. Retype the network key in the Confirm network key box.
8. Click OK. The network name appears in the Preferred networks list box.
To set up a computer-to-computer (ad-hoc) network
The computer-to-computer (ad-hoc) network is supported by the IEEE 802.11b/g wireless standard by means of the current
WiFi standard.
1. Move the Wireless LAN switch to ON.
Turning on the Wireless Network Switch
2. Click Start, Control Panel, Network and Internet Connections, and then click Network Connections. The
Network Connections window appears.
3. In the right panel under LAN or High-Speed Internet, click Wireless Network Connection. The Wireless
Network Connection window appears.
Wireless Network Connection
4. Click Advanced. The Wireless Network Connection Properties dialog box appears.
Wireless Network Connection Properties
Page 67