Sony PCG-K20P - Manual (Page 68)

5. Click Add. The Wireless network properties dialog box appears.
Wireless Network Properties
6. Type the name of the network you want to connect to in the Network name (SSID) box.
7. If available, make sure the Data encryption (WEP enabled) check box is selected.
If the Data encryption (WEP enabled) check box is not available:
1. Select an authentication method from the Network Authentication menu.
2. Select a data encryption method from the Data Encryption menu.
8. Click to cancel the The key is provided for me automatically check box.
9. Type a network key in the Network key box.
10. Retype the network key in the Confirm network key box.
11. Click to select This is a computer-to-computer (ad hoc) network; wireless access points are not used.
12. Click OK. The network name appears in the Preferred networks list box.
13. Click Advanced. The Advanced dialog box appears.
Adv anced
Page 68