Sony DSC-T10 User Manual

Page 95

Advertising
background image

95

Tr

o

uble

sh

ooti

n

g

Troubleshooting

Anti-blur function does not work.

•

The anti-blur function does not work when

appears on the display.

•

The anti-blur function may not work properly when shooting night scenes.

•

Shoot after pressing the shutter button halfway down; do not press it fully down suddenly.

Recording takes a long time.

•

The NR slow shutter function is activated (page 13). This is not a malfunction.

The image is out of focus.

•

The subject is too close. Shoot in

(Macro) recording mode. Make sure to position the lens

farther away from the subject than the shortest shooting distance, approximately 8 cm (3 1/4
inches) (W)/25 cm (9 7/8 inches) (T), when shooting. Or, set

(Magnifying Glass) and

focus from a distance of approx. 1 cm to 20 cm (13/32 inch to 7 7/8 inches) from the subject
(page 20).

•

(Magnifying Glass) is set, or

(Twilight mode),

(Landscape mode) or

(Fireworks mode) is selected in the Scene mode when shooting still images.

•

The Focus preset function is selected. Select the auto focus mode (page 35).

•

Refer to “If the subject is out of focus” on page 36.

Zoom does not work.

•

When

(Magnifying Glass) is selected, the optical zoom is not available.

•

The smart zoom cannot be used when:

–

The image size is set to [7M] or [3:2].

–

Shooting in Multi Burst mode.

•

The digital zoom cannot be used while shooting movies.

The flash does not work.

•

The flash is set to

(Flash forced off) (page 20).

•

You cannot use the flash when:

–

[Mode] (REC Mode) is set to [Burst], [Exp Brktg] or [Multi Burst] (page 41).

–

(High sensitivity mode),

(Twilight mode) or

(Fireworks mode) is selected in the

Scene mode (page 25).

–

Shooting movies.

•

Set the flash to (Flash forced on) when

(Magnifying Glass) is set, or

(Landscape

mode),

(Hi-Speed shutter mode),

(Beach mode), or

(Snow mode) is selected in

the Scene mode (page 20).

Fuzzy specks appear in images shot using the flash.

•

Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.

Advertising