Sony STR-DH700 - Manual (Page 87)

87 US
S
-A
IR
Op
er
ati
ons
6
Press V/v repeatedly to select
the setting you want.
• RF AUTO: Normally select this. The
system changes “RF SETUP” to “RF
ON” or “RF OFF” automatically.
• RF ON: The system transmits sound by
searching the better channel for
transmitting.
• RF OFF: The system transmits sound by
fixing the channel for transmitting.
To exit the menu
Press AMP MENU.
Notes
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set “RF SETUP”.
• In most cases, you will not need to change this
setting.
• If “RF SETUP” is set to “RF OFF,” transmission
between the S-AIR main unit and S-AIR sub unit
can be performed using one of the following
channels.
– S-AIR ID A: equivalent channel for Wi-Fi
channel 1
– S-AIR ID B: equivalent channel for Wi-Fi
channel 6
– S-AIR ID C: equivalent channel for Wi-Fi
channel 11
• The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
Enjoying the S-AIR
receiver while the S-AIR
main unit is in standby
mode
(For the S-AIR receiver only (not
supplied))
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode by setting
“STANDBY” to “STBY ON”.
1
Press AMP MENU.
“1-LEVEL” appears on the display.
2
Press V/v repeatedly to select
“9- S-AIR”.
3
Press or b to enter the
menu.
4
Press V/v repeatedly to select
“STANDBY”.
1 2 3
4 6
7 8
0/10 ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP DMPORT
VIDEO1 VIDEO2 BD DVD
2CH A.F.D.
TV CH –
PRESET –
TV CH +
PRESET +
MOVIE MUSIC
AMP MENU
CLEAR
DISPLAY MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATER
SAT TV SA-CD/CD TUNER
?/1
. < < >
5
>10
REPLAY ADVANCE
– CATEGORY +
MEMORY
O
TV ?/1
AV ?/1
TOOLS/
OPTIONS
RETURN/EXIT MENU/HOME
AMP
MENU
,
V/v/B/b
Input
buttons
continued