Sony DAV-FX500 - Manual (Page 10)

10 US
Getting
Star
ted – B
A
SIC
–
Before connecting the speakers, attach the speaker stand to the speaker.
About how to connect the speaker cords to the SPEAKER jacks, see page 14.
(For the front speakers only.)
Note
• Spread a cloth on the floor to avoid damaging the floor.
Tip
• You can use the speaker without the speaker stand by installing it on the wall (page 21).
1
Secure the post to the base.
The long post is for floor use, the short post is for tabletop use.
2
Secure the base with the screws.
3
Pull the speaker cord out to a straight length of about 700 mm (28 inch). Fold back about
100 mm (4 inch) and twist together.
Step 1: Assembling the Speakers
Base
Post (long) Post (short)
or
Screws with washer (long) (3)
(supplied)
Bottom of the base
About 100 mm (4 inch)