Sony DAV-FX500 - Manual (Page 27)

Getting Star
ted – AD
V
ANCED –
27 US
To listen to the portable audio source sound through the system
Connect the audio output jacks of the portable audio source to the AUDIO IN jack on the front panel
of the system with the stereo mini-plug cord (not supplied).
Tip
• When listening to MP3 format recordings using a portable audio source, you can enhance the sound.
Press FUNCTION +/- to select “AUDIO.” Connect the portable audio source. Press SOUND FIELD repeatedly
until “A.F.D. STD” appears in the front panel display.
To cancel, select other than “A.F.D. STD.”
If you connect a digital satellite receiver with an DIGITAL OUT
(OPTICAL or COAXIAL) jack
The digital satellite receiver can be connected to the TV/VCR1 (DIGITAL IN COAXIAL) jack or TV/
VCR2 (OPTICAL DIGITAL IN) jack instead of the TV/VCR1 or 2 (AUDIO IN) jacks of the system.
The system can accept both the digital and analog signals. Digital signals have priority over analog
signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
If you connect a digital satellite receiver without an DIGITAL OUT jack
Connect the digital satellite receiver to the TV/VCR1 or 2 jacks only of the system.
To connect the COMPONENT VIDEO OUT jacks of the other component
to the COMPONENT VIDEO IN jacks of this system
Connect the other components to the TV/VCR1 (COMPONENT VIDEO IN) jacks (Y, P
B
/C
B
, P
R
/C
R
)
using the component video cord (not supplied). When connecting a cord, be sure to match the color-
coded sleeves to the appropriate jacks on the components.
Note
• Be sure to make connections securely to avoid hum and noise.
Green
Blue
Red