AVerMedia Technologies NV 6000 EXP - Manual (Page 109)

100
Chapter 9 Image Verification
ImageVerification is a watermark-checking program to identify the authenticity of a saved
image (e.g. by snapshot). This program can only verify uncompressed bmp image files.
9.1 To Run the ImageVerification program
1. Click Start >Programs>DSS>ImageVerification.
2. In the ImageVerification screen, click Load Source Image and locate the image source.
3. Click
Verify Image to begin the process.
4. Check the result in the Processed Image screen. If the picture is unmodified, the image in
the Source Image and Processed Image screen would be exactly the same. If the picture
is being modified, a warning dialog box would prompt you and the modified area is
highlighted.