AVerMedia Technologies NV 6000 EXP - Manual (Page 26)

Chapter 2 Hardware Installation
17
2.9 Connecting the Cameras, a TV and Audio device
2.9.1 Connecting the Cameras, a TV and Audio device to NV3000/5000
1. Connect the cameras to the BNC video input port (see NV3000/5000 card parts ). If you
have installed more than one card, please refer the sequence of the camera to the
number of cards installed in installing the card section.
2. Connect one end of the RCA video cable (not supplied) to the TV OUT port of
NV3000/5000 card and the other end to the TV video input port. If you are not sure,
please refer to the TV user manual.
NV3000/5000
Camera 1 Camera 2 Camera 3 Camera 4
RCA cable
Television
IN 1
IN 2
IN 3
IN 4
TV OUT
3. Connect the audio devices to the Audio input port of the I/O card.
MIC 2 MIC 3 MIC 1 MIC 4
NV5000
I/O Audio
card
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
AUDIO IN 4
AUDIO IN 1
NV3000
I/O Audio
card
2.9.2 Connecting the Cameras, a TV and Audio devices to NV6000
1. Use the supplied AV connection cable and connect it to the D-type AV IN port of NV6000
card (see NV6000 card parts ).
2. Connect the cameras to the BNC video connectors and audio devices to the RCA audio
connectors. Just follow the order basing on the marked sequence.
3. Connect one end of the RCA video cable (not supplied) to the TV OUT port of NV6000
card and the other end to the TV video input port. If you are not sure, please refer to the
TV user manual.