Specifications – Panasonic DMWMCFT5E User Manual

Page 23

Advertising
background image

(ENG) VQT4V83

23

About storage and inspection after use

Always take the digital camera out of the Case.

Make sure that no dirt or dust is stuck to the O-ring.

When storing, remove the buckle so that the marine case will not be closed airtight.

We recommend that the Case be inspected about 3 years after purchase. This
inspection involves dismantling and cleaning the Case, inspecting all the parts and
repairing them if necessary and checking the waterproofness of the Case using the
same hydrostatic test equipment that was used to check the waterproofness before
purchase. The customer is responsible for all transportation costs.

Do not dismantle any parts or use any accessories not specified in these operating
instructions and do not alter the Case. If the Case does not work properly, consult
your dealer.

Specifications

¢

Refer to the operating instructions, catalogue, website etc. of the digital camera
for the latest information on models that can be used.

Compatible model

DMC-FT5/DMC-TS5
(As of January 2013

¢

)

Dimensions

Approx. 152 mm (W)k99 mm (H)k62 mm (D)
[5.98q (W)k3.90q (H)k2.44q (D)]
(excluding the projecting parts)

Mass (Weight)

Approx. 389 g/0.858 lb (including the diffuser)

Material

Polycarbonate

Waterproof construction

O-ring sealing

Water resistant depth

45 m/148 feet

One Panasonic Way, Secaucus, NJ 07094

Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3

 Panasonic Corporation 2013

Printed in Japan

DMW-MCFT5_PP&E-VQT4V83.book 23 ページ 2013年1月16日 水曜日 午前11時35分

Advertising
This manual is related to the following products: