Panasonic S106MF2E5A - Manual (Page 6)

6
Adjusting Airflow Direction
„ Using the wireless remote controller
„ Using the timer remote controller
Press / to select your desired airflow direction.
„ Flap swing motion
Display when swing operation
is stopped
z Pressing the button during
swing operation can stop the
flap at the desired position.
„ Flap fixed (5 levels)
Recommended vertical airflow direction
z Set the flap to the downward position for heating operation.
(With the upward setting, warm air cannot reach the floor.)
z Set the flap to the upward position for cooling operation.
(With the downward setting, condensation may drip on to the
floor.)
U1, T2 type
HEAT COOL / DRY FAN
Airflow direction
display
Airflow direction display
“FLAP” button
“FLAP” button
Fan and
heating
Cooling and
drying
(5 levels) (3 levels)
Recommended Recommended
Fixed to this
position
„ Adjusting the horizontal airflow direction
(Manual: T2 type only)
Move the horizontal airflow vanes
by hand for adjustment.
This section is described in the instruction manual supplied with the timer remote contoller (CZ-RTC2).
Regarding the High-spec Wired Remote Controller (CZ-RTC3), refer to the Operating Instructions supplied with the model CZ-RTC3.
Adjusting the upward and downward motion of airflow direction (U1 and T2 types only)
OI_F569617_EU_L.indb 6 2013-12-17 17:57:42