Adjusting airflow direction, Tips for energy saving – Panasonic S106MF2E5A User Manual
Page 7
7
E
NGLISH
Tips for Energy Saving
Attention:
z
Never use your hands to move the flap (vertical airflow flap)
controlled using the remote controller.
Note
z
When the air conditioner is turned off, the flap automatically
moves toward the direction of closing.
z
The flap (vertical airflow flap) moves to the upward position
during standby operation for heating.
z
The swing operation starts after the standby operation has
finished, but “Swing” is indicated on the remote controller
even during the standby operation.
Avoid
z
Do not block the air intake and outlet of the unit.
(If either is obstructed, the unit will not function
well, causing malfunction.)
z
During cooling operation, use sunshades, blinds or cur-
tains to prevent direct sunlight from entering the room.
Do
z
Always keep the air filter clean.
(A clogged filter will impair the performance of the unit.)
→ “Maintenance” (P.8)
z
To prevent conditioned air from escaping, keep win-
dows, doors and any other openings closed.
Adjusting airflow direction
for multiple indoor units (Timer remote controller only)
When setting the airflow direction of
each indoor unit individually
1
Press
to select the Unit No.
for adjustment.
2
Press
to select your desired
airflow direction.
When setting the airflow direction of
all indoor units at the same time
1
Press
to select
No display
.
2
Press
to select your desired
airflow direction.
1-1
1-2
1-3
1-4
1-8
“UNIT” button
“FLAP” button
z
Maximum of
8 indoor units
can be connected.
Unit No.
When operating multiple indoor units using 1 remote controller, airflow direction can be adjusted for indoor each unit individually or
all units at the same time.
e.g.) 1 outdoor unit
and
8 indoor units
No display
1-1
1-2
1-3
1-4
2-1
2-4
e.g.) 2 outdoor units
and
4 indoor units
No display
1-1
1-2
1-3
1-4
1-8
OI_F569617_EU_L.indb 7
2013-12-17 17:57:43