Optical drive removal procedure, Removing the optical drive – Apple iMac (17-inch Mid 2006) User Manual

Page 68

Advertising
background image

iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive



Removing the Optical Drive

Disconnect the sensor cable from the temperature sensor on top of the optical drive and
remove the two T10 screws from the optical drive clip on the logic board.

Note: Make sure to use a needlenose pliers with teeth to remove the optical drive. The pliers
must have a textured surface to properly grasp the optical drive release tabs.

1.

2.

922-6842

Advertising
This manual is related to the following products: