Panasonic TYTP10E - Manual (Page 7)

E
NGLISH
7
Inserting the battery
When the battery level is low, the indicator lamp blinks 5 times
when the Touch Pen is turned on.
(Replacing the battery at an early stage is recommended.)
1. Turn and slide the unit cover until the entire shape of the
battery is visible.
Unit cover
2. Insert the battery, and slide and turn the unit cover to close
it.
Unit cover
Close the unit cover until it clicks.
NOTE
• Use the specifi ed battery (R03 manganese battery or
LR03 alkaline battery).
• Do not reverse the polarity (positive and negative )
of the battery when inserting.
• Dispose of the used battery as an incombustible waste or
according to the regulations in your area.
• The unit cover can be opened only up to the point where
the battery is placed. Do not forcibly try to open further
than that.