Panasonic CUVE9NKE - Manual (Page 10)

10
POWER NANOE-G TIMER +8/10°C
INDOOR UNIT
CLEANING INSTRUCTIONS CLEANING INSTRUCTIONS HINT HINT
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
• To ensure optimal performance of the unit, cleaning
maintenance has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may see error
code “H99”. Please consult authorized dealer.
2
9
1
7 3
10
8
6 HUMAN ACTIVITY SENSOR
• Do not hit or violently press the sensor or
poke it with a sharp object. This can lead
to damage and malfunction.
• Do not place large objects near the
sensor and keep away heating units
or humidifi ers from the sensor’s
detection area. This may lead to sensor
malfunction.
11 nanoe-G GENERATOR
• Do not touch during operation.
5
1 INDOOR UNIT
• Wipe the unit gently with a soft, dry cloth.
2 FRONT PANEL WITH MOVABLE PANEL
Remove Front Panel
• Raise and pull to remove the front panel.
• Wash gently and dry.
Close Front Panel
• Press down both ends of the front panel to close it securely.
• Do not remove the movable panel from front panel.
3 REMOTE CONTROL RECEIVER
4 SUNLIGHT SENSOR
5 ALUMINIUM FIN
6 HUMAN ACTIVITY SENSOR
7 HORIZONTAL AIRFLOW DIRECTION LOUVER
• Do not adjust by hand.
8 VERTICAL AIRFLOW DIRECTION LOUVER
• Do not adjust by hand.
• Switch off the power supply and unplug before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
4
F568728_YB0512-1062.indb 10 F568728_YB0512-1062.indb 10 6/11/2012 9:43:33 AM 6/11/2012 9:43:33 AM