Panasonic CUVE9NKE - Manual (Page 7)

ENGLISH
7
NOTES NOTES
, , , ,
• Can be activated in all modes and can be cancelled by
pressing the respective button again.
• Cannot be selected at the same time.
• operation can be activated independently.
2 TO SET TEMPERATURE
• Selection range : 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
3 TO TURN OFF THE UNIT
4 TO SELECT FAN SPEED
FAN SPEED
AUTO
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5 TO ADJUST AIRFLOW DIRECTION
AIR SWING
AUTO
AUTO
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position. The vertical louver swing left/right
after the temperature rises.
• In POWERFUL mode, if AUTO is set, the vertical louvers
fi x at center position of the room according to installation
location setting.
6 TO REACH TEMPERATURE QUICKLY
• The temperature setting and the Fan speed automatically
adjusted for higher performance, and will adjust for
adequate operation once the temperature is reached.
• Press the button again or turn OFF the unit to stop this
operation.
7 TO ENJOY QUIET OPERATION
• This operation reduces airfl ow noises.
8
TO CHANGE SETTING ACCORDING TO LIVING
ENVIRONMENT
• Complete below procedures to change the settings.
• 3 options are available in MENU.
CENTER BRIGHTNESS CONTRAST
• Select preference setting.
• Indoor unit installation location
CENTER LEFT RIGHT
• Indoor unit indicator brightness
BRIGHTER
LED
DIMMER
LED
ECONAVI
OFF
• Remote control LCD contrast
CONTRAST
3
4 5 6 7 1 2
• Press SET to confi rm the setting.
5
6 7
4
8
F568728_YB0512-1062.indb 7 F568728_YB0512-1062.indb 7 6/11/2012 9:43:27 AM 6/11/2012 9:43:27 AM