Panasonic CUVE9NKE User Manual
Page 9
ENGLISH
9
10
TO MONITOR HUMAN PRESENCE & ACTIVITY
• The human activity sensor will scan for the heat source
and movement in the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal airfl ow
direction louver fi x at predetermined position.
• When manual AIR SWING
or FAN SPEED is
selected, AUTO COMFORT operation will be cancel.
11
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• nanoe-G starts automatically when the unit switched on.
12
TO USE MAINTENANCE HEATING
+ 8/10°C
• Maintain indoor temperature at +8/10ºC. Fan switches to
high fan speed automatically.
• This operation overwrite the operation mode and could be
cancelled by pressing AUTO, HEAT, COOL or DRY mode.
• Deice operation at outdoor unit will result in
sudden cold air from indoor unit. Eliminate
cold air with heat mode.
10°C
8°C
13
INFO
• Press during HEAT or AUTO mode to retrieve level of heat
stored in heat absorbing device; HEAT CHARGE level 1
(min.) to 4 (max.). “--” will be displayed during COOL, DRY
or NANOE-G mode.
• Press to retrieve error code when the unit stops and the
timer indicator blinks.
If the signal transmission is failed, (PRESS AGAIN).
14
TO TURN OFF THE UNIT AFTER ASLEEP
0.5
SLEEP
1
2
3
5
7
9hr
Cancel
• When used together with the timer, sleep operation has a
priority.
15
PRESS TO RESTORE THE INDOOR UNIT
SETTING
• To restore the remote control’s default setting, remove the
batteries.
NOTES
16
TO SET THE TIMER
• 2 sets of ON and OFF timers are available to turn ON or
OFF the unit at different preset time.
• Complete below procedures to set each timer:
Cancel
Cancel
TIMER
Select ON or OFF timer
Set the
time
Confi rm
• Example of application at living room:
Morning: ON at 07:00 (Wake up)
OFF
at 08:00 (Out for work)
Evening: ON at 17:00 (Back home)
OFF
at 22:00 (Sleep)
• To cancel ON or OFF timer, press
or
to
select respective or then press
.
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
or
to select respective or then press
.
• Upcoming timer will be displayed and will be activated
in sequence.
• When ON Timer is set, the unit may start earlier (up to 15
minutes at COOL mode, up to 40 minutes at HEAT mode)
before the actual set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control Preparation on the back
cover.
F568728_YB0512-1062.indb 9
F568728_YB0512-1062.indb 9
6/11/2012 9:43:31 AM
6/11/2012 9:43:31 AM