ALESIS WILDFIRE 30 User Manual
Page 26
7
Using the Tuner
24
Low
High
In tune
Visual Guide to Tuning
Here are the 12 possible
pitches (a decimal point
indicates a sharp):
= no pitch detected.
The bottom four segments rotate counterclockwise
if pitch is low. The top four rotate clockwise if the pitch
is high. An 8 means the string you have played is in tune
with the displayed pitch.
Changing Pitch Reference
If you turn the VALUE knob while using the tuner, the
display shows you the setting for the Wildfire’s pitch
reference, which is set to 440Hz (shown as
) for the
A note above middle C. The possible range of values for
this setting is 35 to 45, which represents 435Hz to
445Hz.
When you turn the Wildfire on and off again, the
reference pitch is reset to 40.
While you are viewing
or editing the pitch
reference, the display
will return to pitch
indication if you do not
rotate the knob for
more than two seconds.