ALESIS WILDFIRE 30 - Manual (Page 46)

12
Specifications
44
Stereo Link Output
Output Connector:
1/4” TS (Unbalanced)
Output Impedance: 2.2Ω
Max Output Level: 2.4Vp (100KΩ load)
Destination Impedance: >1KΩ
Expression Pedal Input
Intput Connector:
1/4” TRS (Balanced Mono)
Tip Output Level: 3.3VDC
Tip Output Impedance: 50KΩ-150KΩ
Ring Input Level: 1.6VDC-2.5VDC
Ring Input Impedance: 36KΩ
Sleeve Output Level: 1.6VDC (Reference Out)
Sleeve Output Impedance: 100Ω
FootSwitch Inputs
Connector:
1/4” TS (Unbalanced)
Impedance: 10KΩ
Accepted Switch Type: Single-Pole, Single-Throw
Normally Open or Normally Closed
Signal Processing Specifications
Sample Rate: 31.25KHz
Effect Modules: 8
Programs: 8 Banks x 10 Programs = 80
A/D Converter: 20-bit, 64x oversampling
D/A Converter: 20-bit, 128x oversampling
A/C Power Requirements (Refer to the Rear Panel)
Wildfire 15:
25W - 120VAC~ or 230VAC~
Wildfire 30: 45W - 120/230VAC~
Wildfire 60: 90W - 120VAC~ or 230VAC~
Mechanicals
Wildfire 15: 14.25” x 13.25” x 7.15” /
360mm x 335mm x 180mm, 17.0lb/7.7kg
Wildfire 30: 16.25” x 15.25” x 8.15” /
415mm x 385mm x 205mm, 24.0lb/10.9kg
Wildfire 60: 18.40” x 17.50” x 9.40” /
465mm x 445mm x 240mm, 32.0lb/14.5kg