2 power system requirement, 3 power consumption – Advantech RISC SOM-A2558 User Manual

Page 14

Advertising
background image

Your ePlatform Partner

User’s Manual for Advantech SOM-A2558 series module V1.00

14

answer in the 3

rd

mechanical drawing. Maximum height of SOM module allied

with CSB is 5.20mm. One port USB 1.1 host connector height is 8.37mm, 1
DB-9 RS-232 connector is 12.53mm, 1 type-II CF slot is 8.72mm. So, this is
the answer! If users want to use any standard I/O connector on CSB, then
SOM structure is not the maximum height maker. The maximum highness is
decided by I/O connector, not SOM structure.

1.2.2 Power System Requirement

SOM-A2558 Operating DC value table

Symbol

Description

Min.

Typ.

Max.

SYS_VCC3P

3

SOM system DC 3.3V DC-in
power source

3

3.3

3.6

SYS_VCC

SOM system DC 5.0V DC-in
power source

4.5

5.5

5.5

BAT_VCC

Back-up power source for RTC &
SDRAM

-

SYS_VC

C3P3

Input DC Operating Conditions

VIH

Input High Voltage, all standard
input and I/O pins

0.8*VCC

VCC

VIL

Input Low Voltage, all standard
input and I/O pins

VSS

0.2*VCC

Output DC Operating Conditions

VOH

Output High Voltage, all standard
output and I/O pins

VCC-0.1

VCC

VOL

Output Low Voltage, all standard
output and I/O pins

VSS

VSS+0.4


1.2.3 Power Consumption

In WinCE O.S. environment, SOM-A2558 series products have 3 kinds of

operating model :

l Normal mode: I/O and system all work well. All components on

SOM-A55x are powered.

l Idle mode: I/O and system all work well except backlight control

circuit. In order to do power-saving, LCD backlight control circuit
will disable the LCD backlight inverter.

l Suspend mode: all devices are no-powered except SDRAM,

RTC(real time clock) & some CPU(PXA255) power pins. In
suspend mode, SOM-A255x series are only powered by
BAT_VCC pin ( Li-ion 3.0V coin battery from CSB).If user doesn’t
design coin battery to power BAT_VCC pin, then Suspend mode
doesn’t work on SOM-A55x series products.


About detail power consumption of every SOM-A255x series, please

contact with [email protected].

Advertising